Galaxy S4 I9500 Official Firmware & Root I9500XXUFNE4 Android 4.4.2 ~ Myanmar Techno Library

Tuesday, May 27, 2014

Galaxy S4 I9500 Official Firmware & Root I9500XXUFNE4 Android 4.4.2

How To Install

Download Android 4.4.2 XXUFNE4 Firmware for Galaxy S4 I9500
Download Odin 3.09
Switch off your phone and boot Galaxy S4 I9500 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy S4 I9500 to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9500XXDLJ5_I9500ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

-------------------------------------------------------------------------------------------------------

How To Root

Download CF-Auto-Root for Galaxy S4 I9500 and extract the Zip file
Download Odin 3.09 and extract the Zip file
Now, Switch off your phone and boot Galaxy S4 I9500 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy S4 I9500 to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, click on the AP (PDA in older Odin) button and select the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 file.
Finally, click on the Start button to begin the rooting process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish