Galaxy Tab 2 7.0 GT-P3110 Official Firmware & Root P3110XXDME3 Android 4.1.2 ~ Myanmar Techno Library

Saturday, May 24, 2014

Galaxy Tab 2 7.0 GT-P3110 Official Firmware & Root P3110XXDME3 Android 4.1.2

How To Install

Download Android 4.1.2 XXDME3 Firmware for Galaxy Tab 2 7.0 P3110
Download Odin 3.07
Switch off your Tablet and boot Galaxy Tab 2 7.0 P3110 into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode..
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Tab 2 7.0 P3110 to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: P3110XXDLJ5_P3110ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your Tablet should automatically reboot after completion
You can now disconnect your Tablet from computer
Finish

-----------------------------------------------------------------------------------------------------

How To Root

Download CF-Auto-Root for Galaxy Tab 2 7.0 P3110 and extract the Zip file.
Download Odin 3.09 and extract the Zip file.
Now, Switch off your Tablet and boot Galaxy Tab 2 7.0 P3110 into Download Mode by pressing and holding the Volume Down+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Tab 2 7.0 P3110 to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, click on the AP (PDA in older Odin) button and select the CF-Auto-Root-espressowifi-espressowifixx-gtp3110.tar.md5 file.
Finally, click on the Start button to begin the rooting process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your Tablet should automatically reboot after completion
You can now disconnect your Tablet from computer
Finish